Bitte auf den Obermenüpunkt klicken!

Suchergebnisse

Suchtrefferliste
Es wurden 332 Ergebnisse in 47 Millisekunden gefunden.
  1. Regelwerk
    Gasfachliche Norm DIN ISO 21087 Entwurf  2021-07 Gasanalyse – Analytische Methoden für Wasserstoff als Brennstoff – Protonenaustauschmembran(PEM)-Brennstoffzellenanwendung für Straßenfahrzeuge (ISO 21087:2019)
    6142-1, Gas analysis— Preparation of calibration gas mixtures— Part 1: Gravimetric method for Class I mixtures [6] ISO 6145 (all parts), Gas analysis— Preparation of calibration gas mixtures using [...] is a certified gas mixture in hydrogen balance gas. The bias, b, can be expressed in…
  2. Regelwerk
    Wasserfachliche Norm DIN EN 1278 Entwurf  2024-06 Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch – Ozon
    pressure of gas NTP gas under the conditions of normal temperature tn = 0 °C and normal pressure pn = 101 325 Pa 3.2 feed gas substance that is fed as gas to the ozone generation device to generate ozone [...] ozone applies according to Figure 1. Rules relating to safe handling and use shall be…
  3. Regelwerk
    Wasserfachliche Norm DIN EN 18087 Entwurf  2024-07 Anlagen zur In-Situ-Erzeugung von Bioziden – Chlordioxid, hergestellt aus Natriumchlorit durch Ansäuern oder Oxidation
    °C: 15 minutes to 10 minutes; — 15 °C to 25 °C: 10 minutes to 7 minutes; — 25 °C to 35 °C: 7 minutes to 3 minutes. NOTE 3 Systems working with other concentrations might have different reaction times at [...] 25 °C: 75 minutes to 100 minutes; — at 10 °C to 15 °C: 100 minutes to 120 minutes; and — at…
  4. Regelwerk
    Gasfachliche Norm DIN EN 17526-A1 Entwurf  2024-09 Gaszähler – Thermische Massendurchflussgaszähler
    for 66 days to artificial weathering and exposure to artificial radiation in accordance with EN ISO 4892-3:2016 and the parameters in Table 22. Prior to exposure, measurements will be made to enable the [...] force required to remove the label is greater than (0,40 ± 0,04) N·mm−1. Provided that all…
  5. Regelwerk
    Wasserfachliche Norm DIN EN ISO 4064-2  2017-10 Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser – Teil 2: Prüfverfahren
    Allgemeinheit mit Gas und Wasser und deren Verwendung, eingeschlossen die Qualifi- kationsanforderungen an die damit befassten Unternehmen und Personen sowie für die Beschaf- fenheit von Gas und Wasser. Im [...] hygienischen, umweltschutzbezogenen und organisatorischen Anforderungen an die Gas-…
  6. Regelwerk
    Wasserfachliche Norm DIN EN 936 Entwurf  2021-03 Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch – Kohlenstoffdioxid
    H281: Enthält tiefgekühltes Gas; kann Kälteverbrennungen oder -verletzungen verursachen. Für Kohlenstoffdioxid (als Gas) Signalwort: Gefahr Gefahrenhinweis H280: Enthält Gas unter Druck; kann bei Erwärmung [...] fraction from 0 % to 0,05 % (calibrated in 0,01 % steps).The residue volume (V2)…
  7. Regelwerk
    Gasfachliche Norm DIN EN ISO 17507-1 Entwurf  2024-11 Erdgas – Berechnung der Methanzahl von gasförmigen Kraftstoffen für Verbrennungsmotoren – Teil 1: MNc-Verfahren (ISO/DIS 17507-1:2024)
    Natural gas— Determination of water by the Karl Fischer method [22] ISO 19739, Natural gas— Determination of sulfur compounds using gas chromatography [23] ISO 20729, Natural gas— Determination [...] counteracted. Severe knock causes structural damage to critical engine parts, quickly…
  8. Regelwerk
    Gasfachliche Norm DIN 30655-2  2020-12 Installationssysteme für Gasinneninstallation, bestehend aus Mehrschichtverbundrohren und deren Verbindern, mit einem Betriebsdruck ≤ 100 mbar – Teil 2: Konformitätsbewertung
    go to DIN’s website (www.din.de) and search for the document number in question. Dieses Dokument ist Bestandteil des DVGW-Regelwerks „Gas“. The document is part of DVGW rules and regulations "Gas". DIN [...] using the spiral test 6.3.10.1 Test according 6.3.10.2 Resistance to gas 6.3.11.1 Test…
  9. Regelwerk
    Wasserfachliche Norm DIN EN ISO 22391-5  2021-06 Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation – Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) – Teil 5: Gebrauchstauglichkeit des Systems (ISO 22391-5:2009 + Amd. 1:2020)
    1Replace the reference to "EN 713" with "ISO 3503".Replace the reference to "EN 712" with "ISO 3501".Replace the reference to "EN 12293" with "ISO 19893".Replace the reference to "EN 12295" with "ISO 19892" [...] and expressions related to conformity assessment, as well as information about ISO's…
  10. Regelwerk
    Gasfachliche Norm DIN 30655-3  2020-12 Installationssysteme für die Gasinneninstallation, bestehend aus Mehrschichtverbundrohren und deren Verbindern, mit einem Betriebsdruck ≤ 100 mbar – Teil 3: Konformitätsbewertung bei der Verwendung von alternativen Rohrwerkstoffen
    this, a complete conformity assessment according to DIN 30655-2 would have to be carried out after each change of material. The change of materials to at least equivalent materials shall not have any [...] pipe. This means that in order to cover all combinations, the pipe manufacturer would have to
Ergebnisse pro Seite: